News

Oct 26, 2023

Carbon black coated membranes for the treatment of saline water

Researchers describe the preparation and characterisation of carbon black coated membranes for the treatment of saline water by membrane distillation. Membrane distillation (MD) is a promising

Researchers describe the preparation and characterisation of carbon black coated membranes for the treatment of saline water by membrane distillation.

Membrane distillation (MD) is a promising approach to address water scarcity due to its capacity to achieve high water recovery in desalination. However, high energy consumption and decline in permeate flux are key issues of MD desalination. Nanophotonic materials like carbon black (CB) have been used to improve MD performance and reduce energy consumption in the presence of sunlight. Researchers have now investigated different coating procedures for the formation of a uniform layer of CB particles on polytetrafluoroethylene (PTFE) and polyvinylidene fluoride membranes.

The coated membranes were manufactured and characterised using Fourier-transform infrared spectroscopy and scanning electron microscopy. Contact angle measurements demonstrated an increase in hydrophilicity after CB was added. Both types of membranes exhibited an increase in permeate flux and salt rejection with the addition of CB, with the PTFE membrane coated with 0.5% of CB having the highest water flux, reaching 14.6 L/m2 h (LMH) compared to a commercial control having a flux of 8.0 LMH. The effects of different parameters on the performance of the hydrophilic CB-coated PTFE membrane were examined. The results demonstrated that the CB coating developed can be advantageous to improve the performance of MD membranes.

The study has been published in Journal of Coatings Technology and Research, Volume 20, Issue 4, July 2023.